This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 1P+N circuit
breaker with 1 protected pole and 13A In rated current and C tripping curve. The Icn rated
short-circuit breaking capacity is up to 6000A at 230VAC with operating frequency of 50Hz to
60Hz conforming to EN IEC 60898-1 standard. This miniature circuit-breaker protects circuit
against short-circuit and overload current. This product complies with EN IEC 60898-1 standard.
The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000
cycles. The Resi9 is targeted to residential for individual and collective buildings. This
circuit-breaker has an ON OFF indication for local signalling with toggle control. It has a
tunnel type terminals connection at top or bottom. The connection allows rigid copper cables.
The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper
cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible
with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue
rated operational voltage is up to 230VAC with operating frequency of 50Hz to 60Hz. The Ui
rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The
overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in
9mm pitch is 2. The dimensions are (W) 18mm x (H) 81mm x (D) 70.5mm. The product colour is
white (RAL 9003). The product weight is 110g. The pollution degree is 2 conforming to EN IEC
60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2
conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN IEC 60898-1
standard. The wire stripping length is 13mm (top or bottom). The tightening torque of
connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard
the IP degree of protection is IP20 and becomes IP40 once in mod
