This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It
is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve.
The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage
protection time delay is instantaneous. The rated short-circuit breaking capacity is up to
6000A conforming to EN IEC 61009-2-1 standard. This product protects against short-circuit
cable overload electrical shock by indirect contact and fire hazards. It brings safety
reliable solution for commercial and industrial applications with high breaking capacity. This
product complies with EN IEC 61009-2-1 and EN IEC 61009-1 standards. The electrical endurance
is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker
has a position contact indicator and also has a ON OFF indication for local signalling with
toggle control. It has a tunnel type terminals connection at top or bottom. The connection
allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The
connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to
10mm2. The connection allows flexible with ferrule copper cables. The cable cross section
capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating
frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse
withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for
modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D)
70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution
degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver
type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard the
IP degree of protection is IP20 and becomes IP40 once in modu
