TPE - blue - Fillament for 3D-Printers TPE (Thermoplastic Elastomer) is a flexible material
used as 3D printer filament. It is known for being very elastic and rubber-like allowing
printed objects to bend and stretch without breaking. TPE is ideal for prints that require
flexibility such as phone cases gaskets and toys. The material has good wear resistance and
is durable but can be more challenging to print with due to its flexibility. It often requires
a slower printing speed to ensure accurate results. Weight: 1 kg. Length: 420 m. Diameter: 1 75
± 0 05 mm. Melting temperature: 190 - 240 °C. Melting temperature refers to the temperature at
which a filament material for a 3D printer starts to melt and becomes fluid enough to be
extruded through the printer's nozzle. It is a critical parameter as the correct melting
temperature ensures a stable flow rate and good adhesion between the printed layers. Too low a
temperature can result in under-extrusion and weak print quality while too high a temperature
can cause over-melting leading to poor detail and material degradation. Density (at 21.5 °C):
0 9 g cm³. Density tells how heavy a material is relative to its size. For 3D printer filament
it means how much the finished print will weigh. It also affects how solid and strong the print
will be. A higher density can result in heavier and stronger prints while a lower density
gives lighter prints. It also impacts how the filament melts and lays down during printing.
Impact strength: 86 KJ m². Impact Strength (KJ m²) indicates how much energy a material can
absorb upon impact before breaking. For 3D printer filaments it shows how resistant the
material is to shocks. A higher value means the material is more robust and can withstand
greater impacts without breaking. Tensile strength: 500 %. Tensile strength (%) indicates how
much a material can stretch or deform before it breaks. For 3D printer filament it means how
much a printed item can bend or stretch before it fails. This is an important property as it
shows how flexible or brittle the printed object will be. A higher percentage of tensile break
means the material can stretch more making it more flexible and less likely to break under
stress. Yield Strength at 50 mm min: : 43 MPa (3D printing) Yield Strength at 50 mm min
indicates the stress a material can withstand while being stretched at a rate of 50 mm min
before it starts to deform permanently. It shows how strong a printed object is before it loses
its shape and sustains permanent damage. This property is important for understanding how
durable a print will be under stress. Melt flow index: 11. Melt Flow Index (MFI) indicates how
easily a thermoplastic material flows when melted. It describes how quickly the material can be
extruded from a 3D printer nozzle under specific conditions. A higher Melt Flow Index means the
material flows more easily which can be useful for faster printing but may also affect the
strength of the final product. Spool: 200mm outer diameter & 53mm inner diameter & 67mm height
in cardboard
