This EVlink Pro AC product is a wall-mounted charging station for all electrical vehicles
compliant with IEC61851-1 standard. It can also be floor-standing either fixed on a pedestal
or integrated in a kit enclosure. Both pedestal or kit enclosure have to be ordered separately.
It can be installed indoor as well as outdoor. The IP degree of protection is IP55. The IK
degree of protection is IK10. The operating temperature is between -30°C and 50°C. The storage
temperature is between -40°C and 80°C. The output type is a T2 socket-outlet with shutter (T2S)
fixed on the front face of the station. All the contacts of T2S socket-outlet are silver-plated
avoiding overheating. The nominal output power is 22kW. It is supplied in three-phase (3P+N).
The rated charging current is 32A under 380V to 415VAC with a 50Hz to 60Hz frequency. It can be
used with a TT TN-S or TN-C-S earthing system. It is also IT compatible with an additional
isolation transformer on the power supply. The charging station is easy to install and to
commission. It is recommended at multi-family home as well as at fleets at street or at work.
The dimensions are (W) 317mm x (H) 529mm x (D) 153mm. Its product weight is 7.2kg. Its color is
white (RAL9003). It embeds a built-in protection against residual direct current with a 6mA
residual direct current detection device (RDC-DD). A MNx under voltage tripping auxiliary is
also integrated in the charging station for safety. Moreover it is necessary to meet EV Ready
requirements. The charging station can be fed by cable coming from the rear the top or the
bottom of it. To load an electrical vehicle the access control is done by a user
authentication through RFID or NFC badge. But the charging station can also be used for free
access. The load starting can be time-delayed. During the load time the power can be limited
to ensure the continuity of service and optimize the charging time of all the charging station
based on a same feeding. It has 2 Ethernet RJ45 ports for LAN connection. The parameters are
set up through eSetup app via Bluetooth or EcoStruxure EV Charging Expert. The charging station
can be managed in standalone or in clustered architecture. The OCPP 1.6 communication protocol
is used to connect to the supervision device.The available services are the charge detail
records the diagnosis capabilities and the load management. The charging station has the CE
and EV Ready certification.
