EAN: 4260711991172

INTEL 1851 DELID-DIE-MATE HEATER V1 MONTAGEWERK...

The Intel 1851 Delid-Die-Mate Heater V1 is a specially designed heating element for the Intel
1851 Delid-Die-Mate V1. The heater raises the temperature of both the CPU and the delidder to
165°C  the necessary temperature for delidding. The operation is controlled via a control unit
with an OLED display  which is connected to the heater with two cables. A laptop smartphone
charger with at least 65 watts of power and a USB Type-C connector  which is not included  is
required for the heater to operate. A small amount of thermal paste is also needed. Heating
element for warming the CPU Designed for the Intel 1851 Delid-Die-Mate V1 Follow the warning
instructions! Scope of Delivery: 1x Intel 1851 Delid-Die-Mate Heater V1 1x Angle wrench 1x TG
Cleaning Wipes 1x Kryonaut  1g Warning Instructions: Note: When delidding with the Intel 1851
Delid-Die-Mate V1  the CPU should be heated to 165°C (the melting point of indium is 157°C) to
liquefy the indium  making it easier to remove the heat spreader. This minimizes mechanical
stress on the chip and helps prevent damage. Otherwise  there is a high risk that the CPU could
be damaged during delidding. Caution: delidding a CPU can be dangerous. Any damaged caused by
this will not be covered by warranty. Make sure to ressearch how to before trying.

Aktuelle Preise zur EAN 4260711991172

Produktinformationen zur 4260711991172